 | Adds three low profile half height FireWire ports to your PC. |
 | PCI 5V and PCI-X 3.3V |
 | OHCI Compliant Programming Interface |
 | Complies with IEEE-1394 OpenHO speifications V1.0 and V1.1 |
 | Chipset: NEC |
 | Two external & one internal FireWire ports. |
 | 6 pin Firewire sockets. |
 | Plug-and-play and IEEE 1394 compliant. |
 | Supports all IEEE 1394/FireWire devices. |
 | Fast 100/200/400 Mbps data rate. |
 | 32 bit CRC generator and checker for receive and transmit
data. |
 | On-chip synchronous and asynchronous receive and transmit
FIFOs |
 | Ideal for connecting digital camcorders, cameras, scanners,
hard drives, CDR, CDRW, DVD, etc. |
 | Easy connection of IEEE 1394/FireWire devices. |
 | Hot-plug-able without restarting computer. |
 | Easy installation without additional driver required. |
 | Compatible Windows 98, SE, ME, XP, 2000, Vista |
 | 5 year warranty
|
 | Compliant with PCI Specification, revision 2.3 |
 | 64 bit/33MHz and 32 bit/33MHz fully compliant PCI host
interface |
 | Integrated PCI DMA engine |
 | Support 5V and 3.3V PCI Bus |
 | Chipset: Texas Instruments |
 | Isynchronous receive dual-buffer mode |
 | PCI burst transfers and deep FIFOs to tolerate high host
latency |
 | OHCI Compliant IEEE 1394b |
 | Host Controller;
 | 100 Mbit/s (12.5 MB/sec);
 | 200 Mbit/s (25 MB/sec);
 | 400 Mbit/s (50 MB/sec);
 | 800 Mbit/s (100 MB/sec) |
| | |
|
 | Supports data transfer rate up to 800 Mbps |
 | Complies with Standard for a IEEE-1394b High Performance
Serial Bus / i.LINK |
 | Connect up to 63 devices, internal or external |
 | Up to 16 consecutive cable hops of 4.5 meters |
 | Support for digital video in full size, full motion video
of 720 by 480 pixels at 30 frames per second |
 | On Board 4-Pin Power connector to have Extra power input
from system power supply |
 | Fully Supports Provisions of IEEE 1394a-2000 and 1394-1995
Standard |
 | Two external 9-pin 1394b connector (s400b, s800 speeds) |
 | One external 6-pin 1394a connector (s100, s200, s400
speeds) |
 | Requirements:
 | For PC Users: Windows 98SE/Me/2000/2003 Sever/XP/Vista
 | Built-in 800Mbps driver support from Windows OS |
 | For MAC Users: MAC OS Mac OS 10.2.4 or later
 | Built-in 400Mbps driver support from Mac OS 8.6 -
Mac OS X v10.2.3
 | Built-in 800Mbps driver support from Mac OS X
v10.2.4 or newer |
|
|
|
|
 | PCI Express 1-lane (x1) FireWire adapter works in any
available PCI Express slot |
 | Supports FireWire data rates up to 400Mbps |
 | Standard height and low profile brackets are included to
work in different chassis form factors |
 | Compatible with FireWire (1394a) devices including DV
camcorders, CD-RW/DVD-ROM drives, portable hard disks, digital cameras, and
other audio/video devices |
 | Port type: Two 6-pin external FireWire (1394a) |
 | Compliant with PCI Express Base Specification Revision 1.0a |
 | Compliant with IEEE 1394-1995, 1394a-2000 and OHCI 1.1
standards |
 | Supports serial bus data transfer rates of 100, 200 and
400Mb/sec and supports up to 63 devices |
 | Onboard power connector to provide reliable power source |
 | Texas Instruments Chip set |
 | System Requirements
 | PC
 | PCI Express-enabled system with an available PCI
Express slot
 | Windows 2000/XP/Server 2003 Vista 32 and 64 Bit |
|
 | Mac
 | Power Mac G5 Dual Core with an available PCI
Express slot
 | Mac OS X v10.4 or later |
|
|
|
FW840
[an error occurred while processing this directive]


FW880 PCI Express (PICe) Firewire Card 800MHz |
 |
PCI Express 1-lane (x1) FireWire adapter |
 |
Installs in any available PCI Express slot |
 |
Supports data rates up to 800Mbps |
 |
Works with various FireWire devices including DV
camcorder, CD-RW/DVD-ROM, portable hard disk, digital camera, and other
audio/video devices |
 |
Works with Sony, Panasonic, Cannon, Sharp, JVC and many
other DV camcorders for digital video creating/editing |
 |
Regulatory approval(s): FCC Class B (DoC) & CE |
 |
Chipset: Texas Instruments |
 |
Port type: Two 9-pin and one 6-pin external FireWire ports |
 |
Compliant with PCI Express Base Specification Revision
1.0a |
 |
Supports IEEE P1394b and backwards compatible with
1394a-2000 and 1394-1995 standards |
 |
Hot-swapping feature allows you to connect/disconnect
devices without powering down the system |
 |
Supports serial bus data transfer rates of 100, 200, 400
and 800 Mb/sec and supports up to 63 devices |
 |
Onboard power connector to provide reliable power source |
 |
System Requirements
 | PC
 | PCI Express enabled system with an available PCI
Express slot
 | Windows 2000/XP (32-/64-bit)/Server 2003
(32-/64-bit)/Vista (32-/64-bit) |
|
 | Mac
 | Power Mac G5 Dual Core with an available PCI
Express slot
 | Mac OS X v10.4 or later
|
|
|
|
|